Yamaha KX-W392 Owner's Manual - Page 17

ENGLISH FRANÇAIS DEUTSCH MAINTENANCE CLEANING OF THE TAPE PATH Continued high quality performance of your deck is dependent upon periodic cleaning of the heads, capstan, pinch roller, and all surfaces over which the tape travels. Normal use will cause an accumulation of dirt and dust on the heads, capstans, and pinch rollers. This can lead to poor sound quality, drop outs (intervals with no sound), unsteady tape speed, loss of high frequency response, etc. Thus, clean the heads and all surfaces over which the tape travels with a commercially available cleaning cassette and fluid type cleaner. DECK B Capstan Pinch roller Heads Capstan Pinch roller DEMAGNETIZATION After 20-30 hours of use, enough residual magnetism will build up on the heads to cause poor high frequency reproduction. At this time you should use a commercially available cassette tape-type head demagnetizer. ÷ When cleaning the tape path or demagnetizing the heads, be sure to follow carefully the instructions of the concerning materials such as cleaning fluid or head demagnetizer. OPTIONAL REMOTE CONTROL TRANSMITTER With the optional remote control transmitter RS-KX1, you can operate this unit at your listening position. For details, refer to the instruction manual supplied with the remote control transmitter. REMOTE CONTROL OPERATION RANGE Example: KX-W592 Remote sensor RESET MEMORY COUNTER REMAIN TAPE DUBBING ¤ ! INTRO SCAN SEARCH ‹ ⁄ DECK A/B DIR A DIR B MONITOR ! PLAY ⁄ REC/PAUSE STOP REC MUTE s REMOTE CONTROL TRANSMITTER 7 m (23 feet) 30° 30° SVENSKA ITALIANO ESPAÑOL DUTCH 17