Yamaha MCR-E600 MCR-E600 Owners manual Receiver only - Page 21

English SYSTEM CONTROL Before recording When you record by using MDX-E300 or KX-E300, you must first make the connections as shown in "Connecting the system" on page 5. For details, refer to the instructions supplied with the MDX-E300 or KX-E300. A source from the component which is connected to the AUX terminal component can be recorded on a tape or MD. Dubbing setting There are six different combinations of components. Once you choose a certain mode, recording starts and ends automatically in a certain way for each mode. 2 3 Play unit Record unit • Same as CD = TAPE DUBBING MODE TAPE DIRECTION PRESET TUNER PRESET MD DVD TAPE AUX MD REC/PAUSE TAPE REC/PAUSE MODE DUBBING START SLEEP DISPLAY VOLUME DUBBING START 1 Decide the combination of the components. Each time you press DUBBING MODE, the mode will change in the below order. 1 • Recording automatically starts from the beginning of the tape. (By pressing DUBBING START, the tape automatically rewinds to the beginning if it is in the middle.) • When the recording on side A finishes while a track is being played back, the recording on side B starts from the beginning of the same track. • The sound is automatically faded out when it gets close to the end of side B. 4 Play unit Record unit • Recording automatically starts at the beginning of the tape. (By pressing DUBBING START, the tape automatically rewinds to the beginning if it is in the middle.) 2 Press DUBBING START to start recording. Note • The displays 1~4 which include the component you have not connected to your receiver (RX-E600) will be skipped. To stop dubbing Press &. 0111CRXE400(M).17-19.E 19 2004.06.15, 19:10 19