Yamaha MCR-E600 MCR-E600 Owners manual Receiver only - Page 8

GETTING STARTED Setting the clock You must set the clock before you use the timer functions. The clock is based on a 24-hour system. STANDBY/ON DISPLAY HOUR MIN STANDBY/ON TIMER PHONES NATURAL SOUND STEREO RECEIVER RX-E600 VOLUME DISPLAY MEMORY AUTO/MAN'L PRESET/BAND TIMER ADJ BASS TIMER TREBLE PRESET/TUNING HOUR MIN BALANCE - + - + L R MIN MAX INPUT TIME ADJ PRESET/BAND 1 Turn on the power by pressing STANDBY/ON on the front panel, or POWER on the remote control. 2 While the power is on, press DISPLAY to display the time. 3 While holding TIME ADJ, press HOUR to set the hour. • If you want to move the time in the reverse direction, press HOUR while holding TIME ADJ and PRESET/BAND. 4 While holding TIME ADJ, press MIN to set the minutes. • If you want to move the time in the reverse direction, press MIN while holding TIME ADJ and PRESET/BAND. To display the clock Press DISPLAY. The current time appears for about 8 seconds, then the normal display returns. Some buttons and controls may not work while the current time is displayed. Note • In the event of a power failure or when the AC power cord is disconnected for more than five minutes, you must reset the clock. 6 0104CRXE400(M).03-08.E 6 2004.06.15, 19:07