Yamaha MDX-793 Owner's Manual - Page 13

ENGLISH To check the programmed data 1 Stop or pause program playback. 2 Press SKIP $ or › to skip through the step information (or use the jog dial on the front panel). To delete a specific step 1 Stop program playback. 2 Press SKIP $ or › to skip through the step information (or use the jog dial on the front panel). 3 Press DELETE (or DELETE/CANCEL on the front panel) to delete the step. The higher steps are renumbered automatically. To change a step 1 Stop program playback. 2 Press SKIP $ or › to skip through the step information (or use the jog dial on the front panel). 3 Use the numeric buttons to program a new track number for that step. The original track is cleared from memory and the new track is programmed. To cancel Press PROG to turn off the "PROGRAM" indicator, eject the disc, or set POWER to off. Notes • If the total time exceeds 255 minutes "255mOver" is displayed instead of the total time. • SKIP $ or › can be used during playback to skip between programed tracks. • SEARCH ⁄ can be used during playback to search through all tracks in the current program. • SEARCH ! can be used during playback return to the beginning of the current track. To use headphones for private listening Set the PHONES LEVEL knob on the front panel to "0" (minimum) and insert the headphones plug of your stereo headphones into the PHONES jack. To adjust the volume level of the headphones Use the PHONES LEVEL knob. Turn toward "10" (maximum) to increase the volume. Turn toward "0" (minimum) to decrease the volume. 13