Yamaha NX-P100 NX-P100 Owners Manual - Page 15
TROUBLESHOOTING, General
View all Yamaha NX-P100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
English TROUBLESHOOTING If this unit malfunctions, see the following troubleshooting first. If you encounter a problem that is not described below or if this unit still malfunctions after the following solutions are implemented, turn off the power of the unit and contact the nearest authorized Yamaha dealer or the service center. General Problem Cause Solution No sound. Even if the volume is raised, the sound level will not increase. The LED indicator is blinking rapidly. The connection between this unit and the connecting device is not correct. Establish the connection again (☞ P. 4). The volume on this unit or the connecting device is set Raise the volume on this unit and the connecting to the minimum. device. The battery in this unit is weak. Recharge the battery (☞ P. 3). The protection circuitry has been activated by the excessive volume. Lower the volume. The volume on the connecting device is low. Raise the volume on the connecting device. The battery in this unit is weak. Recharge the battery (☞ P. 3). The battery in this unit is weak. Recharge the battery (☞ P. 3). This unit does not work at all. The unit may have received a strong electrical shock such as lightning or excessive static electricity. Reset this unit by holding down the (Power) button for ten seconds or more. Reset has completed when the LED indicator is lit in white for a moment after you released the button. Wait for three seconds or more, and then turn on the power of this unit. 10 En