Yamaha NX-SW10 Owner's Manual - Page 11

INSTALLATION OF THE REAR SPEAKERS Use the supplied type A wall brackets when hanging the rear speakers on a wall. 1 Attach two commercially available wood screws (diameter about 4 mm) in the location on the wall where the rear speaker is to be hung, and then mount the type A bracket on the wood screws. Check that the wood screws are secure inside the narrow portion of the holes in the bracket. s Mounting speakers directly on the wall It is possible to hang the speakers directly on the wall without using the type A brackets by attaching two wood screws on the wall and then using the holes on the rear panel of the speakers for direct attachment. Wood screws having a diameter of about 4 to 5 mm (commercially available) 65 mm 20 mm or more Type A bracket 2 Attach the speaker to the bracket using the supplied wing nut. 70 mm 70 mm 7 mm 20 mm or more Note • After mounting, check that the speakers are attached securely. Wing nut (supplied) 3 Adjust the angle of the speaker and then tighten the wing nut. English 7