Yamaha NX-SW10 Owner's Manual - Page 7

CONNECTIONS CAUTION Always be sure to turn off the power of any component to be connected when making connections. To ensure proper connections • Be sure all connections are made correctly, that is to say L (left) to L, R (right) to R, "+" to "+" and "-" to "-". Some components require different connection methods and have different terminal names. Refer to the instructions for each component to be connected to this unit. Connecting the Center Speaker and the Rear Speakers to the Subwoofer Note • Do not connect any speakers to the speaker terminals on the subwoofer except for the supplied center speaker (NX-VS10C) and rear speakers (NX-VS10E). Damage may result if a different speaker is connected. y Remove the plastic insulation from the ends of the speaker cords and twist the bare wires. (The bare wire will stay neat if you twist while removing the plastic insulation.) The rear panel of the subwoofer REAR, CENTER SPEAKERS + + - - DO NOT CONNECT THIS UNIT TO SPEAKERS OTHER THAN NX-VS10E, NX-VS10C Speaker cord identification label Speaker cord identification label REAR R CENTER REAR L English -+ Right rear speaker -+ Center speaker -+ Left rear speaker 3