Yamaha P-120 Owner's Manual - Page 10

Connections 67 8 9 HOST SELECT 12 3 4 5 Side panel 1DC IN 16V Jack Make sure that the [STANDBY/ON] switch of the P-120/P-120S is set to STANDBY. Connect one end of the AC cable to the PA-300 AC power adap- tor. Connect the AC adaptor's DC cable to the DC IN 16V jack. Plug the other end of the AC cable into an AC outlet. After turning the power OFF, simply reverse the procedure to disconnect the power. • Use ONLY a Yamaha PA-300 AC Power Adaptor (or other adaptor specifically recommended by Yamaha) to power your instrument from the AC mains. The use of other adaptors may result in irreparable damage to both the adaptor and the P-120/P-120S. • Unplug the AC Power Adaptor when not using the P-120/P-120S, or during electrical storms. w DC PA-300 q cable 2[STANDBY/ON] Switch Press the [STANDBY/ON] switch once to turn the power ON, a second time to turn the power OFF. When the power is initially turned ON, a voice selector LED will light. • Even when the switch is in the "STANDBY" position, electricity is still flowing to the instrument at the minimum level. When you are not using the P-120/P-120S for a long time, make sure you unplug the AC power adaptor from the wall AC outlet. e AC cable 8 10 P-120/P-120S