Yamaha P-120 Owner's Manual - Page 34

The Function Mode 34 P-120/P-120S F4.3: Right Voice Octave Shift F4.4: Left Voice Octave Shift Depending on which voices you combine using the split mode, the combination may sound better if one of the voices is shifted up or down an octave. Use the [-/NOM] and [+/YESL] buttons to set the octave of the Left or Right Voice as required. The available settings are "0" for normal pitch, "-1" to shift the pitch down one octave, and "1" to shift the pitch up one octave. Press the [-/NOM] and [+/YESL] buttons simultaneously to recall the default setting (different for each voice combination). Set according to the pitch extent for the song you want to play. NOTE • The octave shift settings are set individually for each voice combination. F4.5: Right Voice Effect Depth F4.6: Left Voice Effect Depth These functions make it possible to individually set the depth of the effect for the Left and Right split-mode Voices. Use the [-/NOM] and [+/YESL] buttons to set the effect depth for the corresponding voice as required. The depth range is from 0 through 20. A setting of "0" produces no effect, while a setting of "20" produces maximum effect depth. Press the [-/ NOM] and [+/YESL] buttons simultaneously to recall the default setting (different for each voice combination). NOTE • The effect depth settings cannot be changed unless the EFFECT is ON. The Function mode must be exited before EFFECT can be turned ON. • The effect depth settings are set individually for each voice combination. F4.7: Sustain Pedal Range The Sustain Pedal Range function determines whether the sustain pedal affects the Right Voice, the Left Voice, or both the Left and Right Voices in the split mode. Use the [-/NOM] and [+/YESL] buttons to select "2" for the Left Voice, "1" for the Right Voice, or "ALL" for both voices. Press the [-/NOM] and [+/YESL] buttons simultaneously to recall the default setting "ALL". F4.8: AUX Pedal Range The AUX Pedal Range function determines whether the AUX pedal affects the Right Voice, the Left Voice, or both the Left and Right Voices in the split mode. Use the [-/NOM] and [+/ YESL] buttons to select "2" for the Left Voice, "1" for the Right Voice, or "ALL" for both voices. Press the [-/NOM] and [+/YESL] buttons simultaneously to recall the default setting "ALL". NOTE • When sustain is assigned to the AUX PEDAL function (F5.1), the setting in this section will be ignored and the setting in section F4.7 will be in affect. F4.9: Reset This function resets all split-mode functions to their default values. Press the [+/YESL] button to reset the values. "End" will appear on the display when all functions have been reset. 32