Yamaha P-90 Owner's Manual - Page 10
L/L+R], PHONES], GRAND PIANO 1], STANDBY/ON] switch, OUTPUT [L][R] jacks RCA phono jacks, [L/L+R] [R] - p 90 amplifier
View all Yamaha P-90 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
ENGLISH 2 [STANDBY/ON] switch This is the power switch. Refer to "Turning the power on" (page 11). 3 OUTPUT [L][R] jacks (RCA phono jacks), [L/L+R] [R] jacks (phone jacks) You can use audio cables to connect an external audio device to these jacks. The audio output of the P-90 is sent from the OUTPUT jacks, allowing you to play it from an external audio device. For monaural output, use [L/L+R] (phone jack). CAUTION Before connecting the P-90 to other electronic components, turn off the power for all components. Before turning the power on or off for all components, set all-volume levels to minimum. CAUTION When turning the power on, first turn the P-90's power on and then turn the power on of the external amplifier/speaker system. When turning the power off, simply reverse the order. Since the P-90 does not contain speakers, you will need to connect external audio equipment or use headphones in order to hear its sounds. 4 [PHONES] jacks (1/4-inch stereo phone jacks) You can connect headphones to these jacks. Since there are two [PHONES] jacks, you can connect two pairs of headphones so that two people can listen. (If connecting only one pair of headphones, you may use either jack.) CAUTION Do not use the P-90 at a high volume level for a long period of time, or your hearing may be damaged. 5 [SUSTAIN] jack You can connect the included pedal to this jack. While this pedal is pressed, notes you play will be sustained even if you take your finger off the key. Since half-pedaling is supported, pressing the pedal more deeply will produce longer sustain. On the [GRAND PIANO 1] voices (including its variation), pressing this pedal will also add sympathetic resonances of the sound board and strings (sustain sampling). Turn off the power before connecting or disconnecting the pedal. If the foot pedal seems to produce effects opposite to your intensions, make sure that the foot pedal plug is properly connected to the [SUSTAIN] jack before turning on the power to the P-90. Do not press the pedal while turning on the power to the P-90. You can adjust the depth of the sound board and string resonance effect (page 39). OUTPUT L R L /L+R R Stereo System OUTPUT L R L /L+R R Instrument amplifier PHONES SUSTAIN When you press the pedal here, the notes you play before you release the pedal have a longer sustain. 10 P-90 Before using the P-90