Yamaha P-90 Owner's Manual - Page 38
F4. Split Mode Functions, Right Voice Octave Shift
View all Yamaha P-90 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
ENGLISH F4. Split Mode Functions This menu enables you to make various detailed settings for Split mode. By changing the split point or other setting, you can optimize the settings for the songs you play. 1. Select the voices in Split mode and engage Function mode and select . 2. Press the [+/YES] button to engage the Split mode function's sub-mode, then use the [TEMPO/FUNCTION# ▼, ▲] buttons to select the desired sub-mode. Press the [-/NO] [+/ YES] button to assign values. If Split mode is not engaged, will appear instead of and you will be unable to select Split mode functions. Also note that you must exit Function mode before you can engage Split mode. Sub-mode F4.1: Split Point Setting range: The entire keyboard Normal setting: F 2 Set the point on the keyboard that separates the right and left-hand sections (split point). The pressed key is included in the left-hand range. • Instead of pressing the [-/NO] [+/YES] buttons, you can engage the split point by pressing the appropriate key on the keyboard. • If Function mode is not engaged, you can change the split point to any other key by pressing the key while holding the [SPLIT] button (page 24). • An example of a key name indication for a split point (F 2) (G2) (A 2) followed by a high bar if sharp followed by a low bar if flat F4.2: Split Balance Setting range: 0 - 20 A setting of "10" produces an equal balance between the two Split mode voices. Settings below "10" increase the volume of the left voice in relation to the right voice, and settings above "10" increase the volume of the right voice in relation to the left voice. Normal setting: Different for each voice combination. The volume level of the two voices combined in Split mode can be adjusted as required. You can make this setting for each combination of the songs you play. F4.3: Right Voice Octave Shift F4.4: Left Voice Octave Shift Setting range: -1, 0, 1 Normal setting: Different for each voice combination You can shift the pitch up and down in octave steps for the Right Voice and Left Voice independently. Make a setting depending on the note range of the songs you play. You can make these settings for each combination of voices individually. F4.5: Right Voice Effect Depth F4.6: Left Voice Effect Depth Setting range: 0 - 20 Normal setting: Different for each voice combination These functions make it possible to individually set the depth of the effect for the left and right Split mode voices. You can make these settings for each combination of voices individually. The effect depth settings cannot be changed unless the [EFFECT] is ON. You must exit Function mode before you can turn on an [EFFECT]. F4.7: Sustain Pedal Range Setting range: ALL (for both voices) 1 (for the right Voice) 2 (for the left Voice) Normal setting: ALL The Sustain Pedal Range function determines whether the sustain pedal affects the right voice, the left voice, or both the left and right voices in Split mode. F4.8: Reset This function resets all Split mode functions to their default values. Press the [+/YES] button to reset the values. SHORTCUT: You can jump directly to Split mode functions by press- ing the [FUNCTION] button while holding the [SPLIT] button. Even if you entered a Function mode via a shortcut, you must use the usual method to exit (i.e., press [FUNCTION] button to make the function indicator go dark). 38 P-90 Detailed Settings - [FUNCTION]