Yamaha PGX1 PGM1/PGX1 Installation Manual - Page 18

Alert list

Get Yamaha PGX1 PDF manuals and user guides View all Yamaha PGX1 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 18 highlights

Alert list The following table lists the alerts generated by the PGM1/PGX1, their meaning, and the appropriate action to take. When the status indicator flashes alternately in green and orange, the contents of the alert message are indicated at the position of the flashing zone / message indicator. The upper left zone / message indicator is set to alert number 1, and the lower right zone / message indicator is set to alert number 8. If the problem cannot be solved, contact your Yamaha dealer listed at the end of this manual. Flashing zone/ message indicator (alert number) 1 2 5 6 Meaning The device has not started up correctly. The data saved in internal memory has been lost. Duplicate IP addresses. IP address was not set within 60 seconds of startup. The UNIT ID is set to "00." Devices with identical UNIT IDs were found connected within the same network. Response Turn off the power of the PSE, then turn on after waiting at least 6 seconds. If this does not solve the problem, please initialize the PGM1. Should this also fails, contact your Yamaha dealer. Change the IP addresses or UNIT ID so that there are no duplicates. Please check rear panel DIP switch 6 (IP SETTING). If DIP switch 6 is set to "PC," use the system's dedicated application software or the DHCP server to specify the device IP address. Set the UNIT ID to something other than "00." Change the UNIT ID so that there are no duplicates. 18 PGM1/PGX1 Installation Manual

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
1
8
PGM1/PGX1 Installation Man
u
al
Alert list
The follo
w
ing ta
b
le lists the alerts generated
b
y the PGM1/PGX1, their meaning, and the
appropriate action to take.
When the stat
u
s indicator flashes alternately in green and orange, the contents of the alert
message are indicated at the position of the flashing zone / message indicator. The
u
pper left
zone / message indicator is set to alert n
u
m
b
er 1, and the lo
w
er right zone / message indicator
is set to alert n
u
m
b
er
8
.
If the pro
b
lem cannot
b
e sol
v
ed, contact yo
u
r Yamaha dealer listed at the end of this man
u
al.
Flashin
g
zone/
messa
g
e indicator
(alert number)
Meanin
g
Response
1
The de
v
ice has not started
u
p correctly.
T
u
rn off the po
w
er of the PSE, then t
u
rn on after
w
aiting at least 6 seconds. If this does not sol
v
e
the pro
b
lem, please initialize the PGM1. Sho
u
ld
this also fails, contact yo
u
r Yamaha dealer.
2
The data sa
v
ed in internal
memory has
b
een lost.
5
D
u
plicate IP addresses.
Change the IP addresses or UNIT ID so that there
are no d
u
plicates.
IP address
w
as not set
w
ithin 60 seconds of
start
u
p.
Please check rear panel DIP s
w
itch 6 (IP SET-
TING). If DIP s
w
itch 6 is set to “PC,”
u
se the sys-
tem’s dedicated application soft
w
are or the DHCP
ser
v
er to specify the de
v
ice IP address.
6
The UNIT ID is set to “00.”
Set the UNIT ID to something other than “00.”
De
v
ices
w
ith identical UNIT
IDs
w
ere fo
u
nd connected
w
ithin the same net
w
ork.
Change the UNIT ID so that there are no d
u
pli-
cates.