Yamaha PSR-E343 Owner's Manual - Page 31

Recording Your Performance Recording to a Specified Track 1 Make the desired settings, such as those of Voice or Style. If you want to record the melody performance, turn ACMP off (page 17). If you want to record Style playback, turn ACMP on (page 17). 2 While holding down the [REC] button, press the desired Track button 1 or 2 to engage the Record mode. If you want to record Style playback, make sure to select the Track 2. If you want to record melody performance, select either Track 1 or Track 2 as desired. The illustration below is the example when selecting Track 2. 3 Press the [+], [-] buttons to select the User Song you want to record. rEC User 1 001 If Track 2 is selected as Recording target for example and Track 1 contains already recorded data, L flashes and R lights in the display. Turning on or off R via the [TRACK 1] button will determine whether you listen to a previously recorded Track or not while recording a new Track. 4 Same as in Steps 3 to 5 (page 30) in "Quick Recording." Clearing a User Song 1 Press the [SONG] button then select the desired User Song by using the Number buttons. 2 Press and hold the [REC] button for longer than a second. A confirmation message appears. YES ClrUser1 Hold for longer than a second. To cancel the operation, press the [-/NO] button. 3 Press the [+/YES] button. A confirmation message appears again. YES Sure? To cancel the operation, press the [-/NO] button. 4 Press the [+/YES] button to clear the Song. A "Writing!" message appears while the track is being cleared. Limitations while Recording • You cannot record the Reverb Level, metronome click, or the Transpose and Tuning settings. • The following settings and buttons are not available, or if operated, the new settings cannot be recorded: ACMP ON/OFF, Split Point, Reverb Type, Chorus Type, Harmony Type, [FUNCTION] button, [PORTABLE GRAND] button. PSR-E343/YPT-340 Owner's Manual 31