Yamaha RXV559 MCXSP10 Manual - Page 101
Setting the remote control to the Zone 2, Controlling Zone 2 with the remote, control
UPC - 027108925400
View all Yamaha RXV559 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 101 highlights
■ Setting the remote control to the Zone 2 mode Note The remote control is originally set to the main mode to control the main zone. To control Zone 2 with the remote control, you must first set the remote control to the Zone 2 mode. 1 Press CODE SET using a ballpoint pen or a similar object. The TRANSMIT indicator on the remote control flashes twice. CODE SET TRANSMIT Flashes USING MULTI-ZONE CONFIGURATION 1 Press and hold POWER or STANDBY and then press to set the remote control to the Zone 2 mode. • Press POWER when the main zone is turned on. • Press STANDBY when the main zone is turned off. The TRANSMIT indicator on the remote control lights up while the remote control is set to the Zone 2 mode. POWER or STANDBY While holding down TRANSMIT Lights up 2 Press the numeric buttons to enter the code number "9992". 2 Press POWER to turn on Zone 2. STEREO 1 MUSIC ENTERTAIN MOVIE 2 3 4 STANDARD SELECT EXTD SUR. DIRECT ST. 5 6 7 8 SPEAKERS 9 ENHANCER 0 NIGHT 10 STRAIGHT ENT. EFFECT TRANSMIT Flashes ■ Controlling Zone 2 with the remote control Notes • The remote control is originally set to the main mode to control the main zone, and the TRANSMIT indicator on the remote control is turned off when the remote control is set to the main mode. • When the remote control is set to the Zone 2 mode, POWER, STANDBY, MUTE, and the input selector buttons are set to control Zone 2. However, the rest of the remote control buttons remain in the main mode. • The remote control automatically exits from the Zone 2 mode in the following cases: - when you do not make any operations within 10 seconds after the remote control is set to the Zone 2 mode. - when you press a remote control button other than POWER, STANDBY, MUTE, and the input selector buttons. POWER 3 Press one of the input selector buttons to select the desired input source of Zone 2. CD DVD MD CD-R CBL DTV SLEEP XM TUNER MULTI CH IN V-AUX DVR y To mute the audio output of Zone 2, press MUTE on the remote control. Press MUTE again to resume the audio output of Zone 2. MUTE 4 Press STANDBY to set Zone 2 to the standby mode. STANDBY ADVANCED OPERATION 97