Yamaha RXV559 MCXSP10 Manual - Page 19
Connecting the speaker cable, Connecting the banana plug, except U.K., Europe and Asia models
UPC - 027108925400
View all Yamaha RXV559 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
PREPARATION ■ Connecting the speaker cable 1 Remove approximately 10 mm (0.4 in) of insulation from the end of each speaker cable and then twist the exposed wires of the cable together to prevent short circuits. CONNECTIONS ■ Connecting the banana plug (except U.K., Europe and Asia models) The banana plug is a single-pole electrical connector widely used to terminate speaker cables. Banana plug 10 mm (0.4 in) 2 Loosen the knob. 1 Tighten the knob. Red: positive (+) Black: negative (-) 2 Insert the banana plug connector into the end of the corresponding terminal. 3 Insert one bare wire into the hole on the side of each terminal. Red: positive (+) Black: negative (-) 4 Tighten the knob to secure the wire. Red: positive (+) Black: negative (-) 15