Yamaha S70 User Manual - Page 32

Bottom section 1 3 S90 XS/S70 XS Editor Window: Bottom section 4 5 2 6 7 1 Controller Set status This section indicates which controller of the S90 XS/S70 XS (either built-in or connected) is used as the Control Source of the Controller Set edited in the RCV/Control Set window. 2 1 3 1 Part Indicates the current Part. When [Voice]/[Multi] is set to "Voice" (Voice mode is enabled), in the Voice mode, this indication is fixed to "1." When the [Voice]/[Multi] is set to "Multi" (Multi mode is enabled), in the Multi mode, this indication is determined by selecting the Part in the Mixer section. 2 Control Source Indicates the six controllers as source of the Controller Set. The abbreviations for the Controllers are as follows: Indication Control Source PB Pitch Bend Wheel MW Modulation Wheel AT After Touch (keyboard) FC Foot Controller FS Foot Switch RB Ribbon Controller Indication Control Source BC Breath Controller AS1 ASSIGN 1 knob AS2 ASSIGN 2 knob FC2 Foot Controller 2 AF1 ASSIGNABLE FUNCTION 1 button AF2 ASSIGNABLE FUNCTION 2 button 3 On/Off status When a lamp is turned on, a certain function (Destination) is assigned to the corresponding Source (controller). When a lamp is turned off, no function (Destination) is assigned to the corresponding Source (controller). 2 Quick Setup From this section, you can instantly call up appropriate settings related to the MIDI parameters. n The settings of the S90 XS/S70 XS instrument made via the operation here cannot be saved as an Editor file. You can select a template from 1 - 3. On the S90 XS/S70 XS instrument, this section is the same as the Quick Setup parameter on the Utility Quick Set display. n The parameters set via the Quick Setup can be edited on the Hardware Utility window (page 43). S90 XS/S70 XS Editor Owner's Manual 32