Yamaha S70 User Manual - Page 39

Menu: [File] menu Setup Determines the basic setup of the S90 XS/S70 XS Editor. After setting necessary parameters, click [OK] to actually apply the settings to the S90 XS/S70 XS Editor. 1 2 3 4 5 6 7 8 9 @ # ) ! 1 [X] (Close) button Click this to close this window without applying the settings. This button is the same as the [Cancel] button (#). 2 [Detail] button You can make detailed settings for the Input Port and Output Port by setting this button to "On." This setting is necessary if the Port name is changed on a computer. 3 MIDI Set the MIDI Port for communication between the S90 XS/S70 XS Editor and the S90 XS/S70 XS instrument. When the [Detail] button (2) is set to "Off," select a value such as "S90 XS" or "S70 XS" at the "USB Device" column. When the [Detail] button (2) is set to "On," select Port 1 and Port 4 for the S90 XS/S70 XS in the MIDI In setting then select Port 1 and Port 4 for the S90 XS/S70 XS in the MIDI Out settings. n When "!" is shown at left of the Port name (e.g., "! Yamaha USB IN 0-1"), this indicates that the previously used Port cannot be found or some Ports are not set properly. Check the MIDI Port settings in the host application. n Keep in mind that setup on the host application (Studio Manager) is necessary before making settings here. When starting Studio Manager as a stand-alone application, see page 5. When starting Studio Manager as a plug-in of the DAW application, refer to the manual of the DAW application. n Make sure to set the MIDI IN/OUT parameter to "USB" in the MIDI display of the Utility mode on the S90 XS/ S70 XS instrument. 4 Device No. Set the Device number to the same as the value specified in the MIDI display of the Utility mode on the S90 XS/S70 XS itself. When the Device number on the S90 XS/S70 XS is set to "All," set the Device No. here to "1." S90 XS/S70 XS Editor Owner's Manual 39