Yamaha Soavo-900SW Owner's Manual - Page 18

USING THIS UNIT Storing the sound balance settings You can store up to 3 sets of your favorite settings (volume, high-cut, phase and B.A.S.S. setting) in this unit. Remote control 1 3 1 POWER STANDBY SLEEP B.A.S.S. PHASE MEMORY PRESET 1 2 3 1 2 HIGH CUT VOLUME 1 Front panel STANDBY/ON indicator SUBWOOFER SYSTEM Soavo-900SW 1 2 3 1 2 3 STANDBY /ON PHASE B.A.S.S. PRESET STANDBY /ON 0 40Hz 100Hz H-CUT 10 VOLUME 1 ■Memory back-up Even if you turn off this unit by using the POWER switch on the rear panel, this unit recalls the last setting when the power is turned back on (Last memory function). Note If the power is cut for more than one week, the setting is cleared. Setting the sleep timer If you set the sleep timer, this unit automatically turns to the standby mode after 120 minutes. ■Storing the setting In the following procedure, PRESET 1 is used as an example. 1 Adjust the sound balance between the volume, high cut, phase and B.A.S.S. (see page 13). 2 Press MEMORY. The PRESET indicators on the front panel flash. POWER STANDBY SLEEP B.A.S.S. PHASE MEMORY PRESET 1 2 3 SLEEP HIGH CUT VOLUME Press SLEEP. The color of the STANDBY/ON indicator changes to orange. SUBW -900SW 31 2 3 PRESET STANDBY /ON Pressing SLEEP again cancels the sleep timer. 3 Press PRESET 1. The PRESET 1 indicator lights up. The current setting is stored as PRESET 1. y • In step 3, pressing a stored number overwrites the old setting. • While the VOLUME control or the H-CUT control is rotating by pressing a PRESET, pressing another PRESET is ineffective. ■Recalling a setting Press PRESET you want to recall (1, 2 or 3). 14 En