Yamaha Soavo-900SW Owner's Manual - Page 5

Contents, Special Instructions For U.k. Model - subwoofers

Page 5 highlights

• VOLTAGE SELECTOR (Asia and General models only) The voltage selector switch on the rear panel of this unit must be set for your local main voltage BEFORE plugging this unit into the AC main supply. Voltages are 110/120/220/230-240 V AC, 50/60 Hz. For U.K. customers If the socket outlets in the home are not suitable for the plug supplied with this appliance, it should be cut off and an appropriate 3 pin plug fitted. For details, refer to the instructions described below. Note: The plug severed from the mains lead must be destroyed, as a plug with bared flexible cord is hazardous if engaged in a live socket outlet. SPECIAL INSTRUCTIONS FOR U.K. MODEL IMPORTANT: THE WIRES IN MAINS LEAD ARE COLOURED IN ACCORDANCE WITH THE FOLLOWING CODE: Blue: NEUTRAL Brown: LIVE As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows: The wire which is coloured BLUE must be connected to the terminal which is marked with the letter N or coloured BLACK. The wire which is coloured BROWN must be connected to the terminal which is marked with the letter L or coloured RED. Making sure that neither core is connected to the earth terminal of the three pin plug. CONTENTS GETTING STARTED 2 Features 2 About this manual 2 Supplied accessories 2 Controls and functions 3 Preparing the remote control 5 PLACEMENT 6 CONNECTIONS 7 1 Connecting to the amplifier equipped with subwoofer (line out) terminal(s 7 2 Connecting to an amplifier not equipped with a subwoofer (line out) terminal 9 Connecting to the ground terminal 12 Connecting the power cable 12 USING THIS UNIT 13 Adjusting the sound balance 13 Storing the sound balance settings 14 Setting the sleep timer 14 Operating the power of this unit using the remote control of your amplifier 15 Frequency response 16 Advanced Yamaha Active Servo Technology II 17 TROUBLESHOOTING 18 SPECIFICATIONS 19 FOR CANADIAN CUSTOMERS To prevent electric shock, match wide blade of plug to wide slot and fully insert. This Class B digital apparatus complies with Canadian ICES-003. 1 En

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24

1
En
VOLTAGE SELECTOR
(Asia and General models only)
The voltage selector switch on the rear panel of this
unit must be set for your local main voltage BEFORE
plugging this unit into the AC main supply. Voltages
are 110/120/220/230-240 V AC, 50/60 Hz.
For U.K. customers
If the socket outlets in the home are not suitable for the
plug supplied with this appliance, it should be cut off and
an appropriate 3 pin plug fitted. For details, refer to the
instructions described below.
Note:
The plug severed from the mains lead must be
destroyed, as a plug with bared flexible cord is hazardous
if engaged in a live socket outlet.
SPECIAL INSTRUCTIONS FOR U.K. MODEL
GETTING STARTED
.............................................
2
Features
..................................................................
2
About this manual
..................................................
2
Supplied accessories
.............................................
2
Controls and functions
...........................................
3
Preparing the remote control
.................................
5
PLACEMENT
........................................................
6
CONNECTIONS
....................................................
7
Connecting to the amplifier equipped
with subwoofer (line out) terminal(s)
........................
7
Connecting to an amplifier not equipped
with a subwoofer (line out) terminal
........................
9
Connecting to the ground terminal
.....................
12
Connecting the power cable
................................
12
USING THIS UNIT
...............................................
13
Adjusting the sound balance
...............................
13
Storing the sound balance settings
....................
14
Setting the sleep timer
.........................................
14
Operating the power of this unit using
the remote control of your amplifier
...................
15
Frequency response
.............................................
16
Advanced Yamaha
Active Servo Technology II
...............................
17
TROUBLESHOOTING
........................................
18
SPECIFICATIONS
..............................................
19
IMPORTANT:
THE WIRES IN MAINS LEAD ARE COLOURED
IN ACCORDANCE WITH THE FOLLOWING
CODE:
Blue: NEUTRAL
Brown: LIVE
As the colours of the wires in the mains lead of this
apparatus may not correspond with the coloured
markings identifying the terminals in your plug,
proceed as follows: The wire which is coloured
BLUE must be connected to the terminal which is
marked with the letter N or coloured BLACK. The
wire which is coloured BROWN must be connected
to the terminal which is marked with the letter L or
coloured RED. Making sure that neither core is
connected to the earth terminal of the three pin plug.
FOR CANADIAN CUSTOMERS
To prevent electric shock, match wide blade of plug
to wide slot and fully insert.
This Class B digital apparatus complies with
Canadian ICES-003.
CONTENTS
1
2