Yamaha Soavo-900SW Owner's Manual - Page 7

Controls and functions ■Front panel GETTING STARTED 1 2 3 SUBWOOFER SYSTEM Soavo-900SW 1 2 3 1 2 3 STANDBY /ON PHASE B.A.S.S. PRESET STANDBY /ON 4 140Hz H-CUT 5 10 VOLUME 6 8 7 0 40Hz 40Hz 1 Remote control sensor Receives signals from the remote control. 2 STANDBY/ON indicator Green: Lights up when this unit is on. Red: Lights up when this unit is in the standby mode. Orange: Lights up when the sleep timer is on. 3 PHASE indicator Green: Lights up when the phase is set in the reverse mode. Red: Lights up when the phase is set in the regular mode. 4 STANDBY/ON switch Turns on or sets this unit to the standby mode. Note In the standby mode, this unit consumes a small amount of power. 5 H-CUT control Adjusts the high frequency cut off point depending on the connected front speakers or your preference (see page 13). One graduation of this control represents 10 Hz. H-CUT 140Hz 6 VOLUME control Adjusts the volume level. Turn the control clockwise to increase the volume, counterclockwise to decrease the volume. 7 B.A.S.S. indicators Light up to indicate the currently selected B.A.S.S. number (1, 2 or 3) (see page 13). 8 PRESET indicators Light up to indicate the currently selected PRESET number (1, 2 or 3) (see page 14). Notes • If you set this unit to the standby mode when one of the PRESET indicators is lit, no PRESET indicator lights up when you turn on this unit next time. • The PRESET indicator turns off when you press any button other than PRESET 1, 2, or 3, or when you operate any other function of this unit. 3 En