Yamaha U1-SILENT Owners Manual - Page 13

English Setting the Amount of Reverb Reverb adds echo to the sound to give it more fullness and reverberation. Use the REVERB control to adjust the depth (the degree to which the reverb effect is applied to the sound). To turn the reverb off, set the control in the far left position. You can also change the type of reverb to apply. Reverb type Room Hall 1 (Default setting) Hall 2 Stage Effect Setting method Reverberation similar to that heard in a normal Hold down the A-1, A#-1, and B-1 keys and press C2. room Reverberation similar to that heard in a small Hold down the A-1, A#-1, and B-1 keys and press D2. concert hall Reverberation similar to that heard in a large Hold down the A-1, A#-1, and B-1 keys and press E2. concert hall Reverberation similar to that heard on a stage Hold down the A-1, A#-1, and B-1 keys and press F2. The reverb type reverts to its default setting when you turn the power off. A#-1 A-1 B-1 C2 (Room) F2 (Stage) D2 (Hall 1)-default E2 (Hall 2) Adjusting the Pitch (Tuning) The pitch of this instrument is set so that A3=440Hz. You can fine tune the pitch up or down 65 cents in 1 cent steps (100 cents is equal to 1 semitone). Operation Raise the pitch Lower the pitch Return to default tuning Setting method Hold down the A-1 and B-1 keys and press any one of the keys between C3 and B3. Hold down the A-1 and A#-1 keys and press any one of the keys between C3 and B3. Hold down the A-1, A#-1, and B-1 keys and press any one of the keys between C3 and B3. The pitch setting is stored when you turn the instrument off. A#-1 A-1 B-1 C3-B3 7