Yamaha YDP-141 Owner's Manual - Page 25

ENGLISH Recording Your Performance Playing Back Recorded Performance Data 1 Press the [PLAY] button. The [PLAY] button indicator and the indicator for the part that contains data light up, and the recorded part starts playing back. If the user song contains no data, pressing the [PLAY] button will not start playback. The parts can be turned on or off individually during playback. Refer to the procedure on page 26. 2 Press the [PLAY] button to stop the playback When the user song finishes playing back, this instrument automatically returns to the previous mode. To stop playback in the middle of a song, press the SONG [PLAY] button. Erasing Recorded Performance Data You can erase the entire recorded user song (including both [+ R] and [- L] part). 1 Press the [REC] button to engage Record Ready mode. The [REC] and [+ R] button indicators flash. If the left part ([- L]) contains data, [- L] button indicator lights up. 2 While holding down the [PLAY] button, press the [REC] button to engage Erase Ready mode. The [REC], [PLAY], [+ R] and [- L] button indicators flash. To cancel the erase operation, press any button whose indicator is NOT flashing (such as the [DEMO/SONG], [PIANO/VOICE] or [METRONOME] button). 3 Press the [REC], [PLAY], [+ R] or [- L] button to erase recorded performance data. The [REC], [PLAY], [+ R] and [- L] button indicators light up in turn from top to bottom. All button indicators turn off after data is erased. Erasing individual part data Hold down the [REC] button and press the [+ R] or [- L] button to engage Part Record Ready mode. (See step 2 on page 23.) Press the [PLAY] button to start recording. Without playing the keyboard, press the [PLAY] or [REC] button to stop recording. All data previously recorded for the selected part will be erased. The button indicator turn off. YDP-161/141 Owner's Manual 25