Yamaha YDP-165 YDP-165_YDP-145_YDP-S55_YDP-S35_Owners Manual - Page 35
Secure the pedal box., Set the main unit in place., Secure the main unit by tightening, the thick
View all Yamaha YDP-165 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Keyboard Stand Assembly 2-4 Securely tighten the screws on the top of the back board that were attached in step 2-2. Side board (R) 2-2, 2-4 × 2 Thin screws (4 × 12 mm) Side board (L) Back board 2-1 × 4 2-3 Tapping screws (4 × 20 mm) 3. Secure the pedal box. 3-1 Securely tighten the screws on the pedal box that were attached in step 1. 3-2 Attach the caps to the screw heads. Side board (L) 3-2 × 4 Caps Side board (R) 4. Set the main unit in place. 4-1 Be sure to hold the bottom surface at least 10 cm inside from the edge of the main unit so that you do not pinch your hands. 4-2 Place the main unit on the side boards so that the front of the main unit and the side boards are aligned. Slide the main unit forward and insert the metal fittings on the bottom of the main unit into the metal fittings on the side boards. CAUTION • Be careful not to pinch your hands or drop the main unit. • Do not hold anywhere other than the specified position. Main unit At least 10 cm Side board (R) At least 10 cm Back board Side board (L) Back board Pedal box 3-1 5. Secure the main unit by tightening the thick screws (6 × 16 mm). Main unit Side board (R) Side board (L) × 4 Thick screws (6 × 16 mm) 35 YDP-165, YDP-145, YDP-S55, YDP-S35 Owner's Manual