Yamaha YDP-181 Owner's Manual - Page 47
F4. Other Functions, F5. Metronome Volume, Sub-mode, Left Pedal Mode, Soft Pedal Effect Depth
View all Yamaha YDP-181 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
ENGLISH F4. Other Functions This section provides a variety of other functions, including letting you assign the operation of the left pedal to one of several modes, and allowing you to select specific song channels for playback. 1. Engage the Function mode and select 2. Press the [+/YES] button to engage the other functions' sub-mode, then use the [TEMPO/ FUNCTION ▼, ▲] buttons to select the desired sub-mode. Press the [-/NO] or [+/YES] button to select the desired pedal function or assign the values. Sub-mode F4.1 Left Pedal Mode Setting range: 1. Soft Pedal The soft pedal reduces the volume and slightly changes the timbre of notes played while the pedal is pressed. The soft pedal will not affect notes that are already playing. 2. Song Play/Pause This mode allows you to start or pause song playback. In this mode, the Left Pedal functions in the same manner as the SONG [PLAY/PAUSE] button on the panel. Normal setting: 1 (Soft Pedal) F4.2 Soft Pedal Effect Depth Setting range: 1 - 5 Normal setting: 3 This function sets the depth of the soft pedal effect. F4.3 Song Channel Selection Setting range: ALL, 1&2 Normal setting: ALL The setting here only affects Disklavier Piano Soft songs, and non-protected External songs. You can specify which song channels will play back on this instrument. When "ALL" is selected, channels 1 - 16 will be played back. When "1&2" is selected, only channels 1 and 2 will be played back, while channels 3 - 16 will be transmitted via MIDI. Detailed Settings - [FUNCTION] F5. Metronome Volume You can change the volume of the metronome sound. Use this function to adjust the metronome volume. 1. Engage the Function mode and select . 2. Use the [-/NO] and [+/YES] buttons to set the metronome volume as required. Setting range: 1 - 20 Normal setting: 10 NOTE SHORTCUT: You can jump directly to the metronome functions by pressing the [TEMPO/FUNCTION] button while holding the METRONOME [ON/OFF] button. To exit the Function mode, you still need to press the [TEMPO/ FUNCTION] button so that the TEMPO indicator lights up. Owner's Manual 47