Yamaha YDP-181 Owner's Manual - Page 58
Keyboard Stand Assembly
View all Yamaha YDP-181 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
ENGLISH Keyboard Stand Assembly Keyboard Stand Assembly CAUTION • Assemble the stand on a hard and flat floor with ample space. • Be careful not to confuse parts, and be sure to install all parts in the correct orientation. Please assemble the unit in accordance with the sequence given below. • Assembly should be carried out by at least two persons. • Be sure to use only the included screws of the specified sizes. Do not use any other screws. Use of incorrect screws can cause damage or malfunction of the product. • Be sure to tighten all screws upon completing assembly of the unit. • To disassemble the unit, reverse the assembly sequence given below. Have a Philips-head (+) screwdriver of the appropriate size ready. Remove all parts from the package and make sure you have all of the items. Assembly Parts 6 x 20 mm long screws x 4 4 x 20 mm tapping A screws x 4 Foamed styrol pads Remove foamed styrol pads from the package, position them on the floor, then place A on top of them. Position the pads so that they will not hide the connectors on the bottom of A. B C A bundled pedal cord is attached to the reverse side. D E 6 x 16 mm short screws x 4 Cord holders x 2 4 x 12 mm thin screws x 2 Headphone hanger 4 x 10 mm thin screws x 2 Headphone hanger Power cord Adjuster (x 1) 58 Owner's Manual