Yamaha YDP-223 Owner's Manual - Page 29

Re-recording TRACK1

Get Yamaha YDP-223 PDF manuals and user guides View all Yamaha YDP-223 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 29 highlights

ENGLISH 3. Select the record track. When Record mode is engaged in the previous step, the last-recorded track will automatically be selected for recording and its indicator - i.e. the [TRACK1] or [TRACK2] button indicator - will glow red. If you want to record on a different track, press the appropriate track button so that its indicator glows red. 4. Start recording. Recording will begin automatically as soon as you play a note on the keyboard or press the SONG [START/STOP] button. The current measure number will appear on the display while recording. 5. Stop recording. Press either the [REC] or SONG [START/STOP] button to stop recording. The indicator of the recorded track will glow green to indicate that it now contains data. (Record mode is disengaged automatically.) 6. Play back the recorded performance. Press the SONG[START/STOP] button to play back the recorded performance. To stop playback in the middle of a song, press the SONG[START/STOP] button. TIP If the metronome was on when you started recording, you'll be able to keep time with the metronome while recording, but the metronome sound will not be recorded. TIP For more recording information, see page 30. TIP The left pedal can be assigned to start and stop recording via the "Left Pedal Mode" function described on page 40. NOTE The record track indicator will begin to flash when the recorder memory is almost full. If the memory becomes full during recording, "FUL" will appear on the display and recording will stop automatically. (All recorded data up to that point will be retained.) NOTE Pressing the SONG [START/ STOP] button to start recording, then pressing it again to stop recording will erase all previously-recorded data on the selected track. Re-recording TRACK1 This section explains how to record again in case your performance was not satisfactory. 1. Select a voice or voices (and other settings) for recording, if necessary. Repeat Step 1 on page 28 if you wish to change the previous settings. 2. Re-engage Record Ready mode. Press the [REC] button, again. The selected track's indicator flashes in red. Follow the procedure from Step 4 on this page to re-record. TIP If you want to change the tempo, time signature, reverb type, or effect type when rerecording a track or when recording to another track, do so after you engage Record Ready mode (step 2). NOTE You cannot re-record in the middle of a song. YDP-223 Recording Your Performance 29

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
YDP-223
Recording Your Performance
ENGLISH
29
3.
Select the record track.
When Record mode is engaged in the previous step, the last-recorded track will
automatically be selected for recording and its indicator — i.e. the
[TRACK1]
or
[TRACK2]
button indicator — will glow red. If you want to record on a different
track, press the appropriate track button so that its indicator glows red.
4.
Start recording.
Recording will begin automatically as soon as you play a note on the keyboard
or press the
SONG [START/STOP]
button. The current measure number will
appear on the display while recording.
5.
Stop recording.
Press either the
[REC]
or
SONG [START/STOP]
button to stop recording.
The indicator of the recorded track will glow green to indicate that it now con-
tains data. (Record mode is disengaged automatically.)
6.
Play back the recorded performance.
Press the
SONG[START/STOP]
button to play back the recorded performance.
To stop playback in the middle of a song, press the
SONG[START/STOP]
but-
ton.
Re-recording TRACK1
This section explains how to record again in case your performance was not satisfactory.
1. Select a voice or voices (and other settings) for recording, if necessary.
Repeat Step 1 on page 28 if you wish to change the previous settings.
2. Re-engage Record Ready mode.
Press the
[REC]
button, again.
The selected track’s indicator flashes in red.
Follow the procedure from Step 4 on this page to re-record.
TIP
If the metronome was on when
you started recording, you’ll be
able to keep time with the met-
ronome while recording, but the
metronome sound will not be
recorded.
TIP
For more recording information,
see page 30.
TIP
The left pedal can be assigned
to start and stop recording via
the “Left Pedal Mode” function
described on page 40.
NOTE
The record track indicator will
begin to flash when the recorder
memory is almost full. If the
memory becomes full during
recording, “FUL” will appear on
the display and recording will
stop automatically. (All recorded
data up to that point will be
retained.)
NOTE
Pressing the
SONG [START/
STOP]
button to start recording,
then pressing it again to stop
recording will erase all previ-
ously-recorded data on the
selected track.
TIP
If you want to change the
tempo, time signature, reverb
type, or effect type when re-
recording a track or when
recording to another track, do
so after you engage Record
Ready mode (step 2).
NOTE
You cannot re-record in the mid-
dle of a song.