Yamaha YDP-223 Owner's Manual - Page 40

ENGLISH F4. Other Functions This function conveniently lets you set operation of the left pedal to one of the modes listed below. 1. Engage Function mode and select . 2. Press the [+/YES] button to engage the other functions' sub-mode, then use the [TEMPO/ FUNCTION# ▼, ▲] buttons to select the desired sub-mode. Press the [-/NO] or [+/YES] button to select the desired pedal function or assign the values. Sub-mode Left Pedal Mode Setting range: 1. Soft Pedal The soft pedal reduces the volume and slightly changes the timbre of notes played while the pedal is pressed. The soft pedal will not affect notes that are already playing. 2. Song Start/Stop This mode allows you to start or stop song playback. In this mode, the Left Pedal functions in the same manner as the SONG [START/STOP] button on the panel. Normal setting: 1(Soft Pedal) Soft Pedal Effect Depth Setting range: 1 - 15 Normal setting: 3 This function sets the depth of the soft pedal effect. F5 Metronome Volume You can change the volume of the metronome sound. Use this function to adjust the metronome volume. 1. Engage Function mode and select . 2. Use the [-/NO] and [+/YES] buttons to set the metronome volume as required. Setting range: 1 - 20 Normal setting: 10 TIP SHORTCUT: You can jump directly to the metronome functions by pressing the [TEMPO/FUNCTION#] button while holding the METRONOME [START/STOP] button. To exit Function mode, you still need to press the [TEMPO/ FUNCTION#] button so that the TEMPO indicator lights up. F6. Preset Song Part Cancel Volume This function sets the volume at which a "canceled" part is played during preset song playback. Adjust the part volume to a comfortable level and use the "canceled" part as a guide with which to play along. 1. Engage Function mode and select . 2. Use the [-/NO] and [+/YES] buttons to set the volume as required. Setting range: 0 - 20 Normal setting: 5 40 YDP-223 Detailed Settings - [FUNCTION]