Yamaha YDP-223 Owner's Manual - Page 42
Program Change ON/OFF, MIDI Transmit Transpose, Panel/Status Transmit, Procedure, Setting range - owners manual
View all Yamaha YDP-223 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
ENGLISH Program Change ON/OFF Normally the YDP-223 will respond to MIDI program change numbers received from an external keyboard or other MIDI device, causing the correspondingly-numbered voice to be selected on the corresponding channel (the keyboard voice does not change). The YDP-223 will normally also send a MIDI program change number whenever one of its voices is selected, causing the correspondingly-numbered voice or program to be selected on the external MIDI device if the device is set up to receive and respond to MIDI program change numbers. This function makes it possible to cancel program change number reception and transmission so that voices can be selected on the YDP-223 without affecting the external MIDI device. TIP For information on program change numbers for each of the YDP-223's voices, refer to page 61 in the MIDI Data Format section. Setting range: ON/OFF Normal setting: ON Control Change ON/OFF Normally the YDP-223 will respond to MIDI control change data received from an external MIDI device or keyboard, causing the voice on the corresponding channel to be affected by pedal and other "control" settings received from the controlling device (the keyboard voice is not affected). The YDP-223 also transmits MIDI control change information when the pedal or other appropriate controls are operated. This function makes it possible to cancel control change data reception and transmission so that, for example, the YDP-223's pedal and other controls can be operated without affecting an external MIDI device. TIP For information on control changes that can be used with the YDP-223, refer to the MIDI Data Format on page 61. Setting range: ON/OFF Normal setting: ON MIDI Transmit Transpose This function allows the MIDI note data transmitted by the YDP-223 to be transposed up or down in semitone increments by up to plus or minus 12 semitones. The pitch of the YDP-223 itself is not affected. Setting range: -12 - 0 - 12 (in semitones) Normal setting: 0 Panel/Status Transmit This function causes all the current YDP-223 panel settings (selected voice, etc.) to be transmitted via the MIDI OUT terminal. This is particularly useful if you will be recording performances to a MIDI sequence recorder, such as the Yamaha MIDI Data Filer MDF3, which will be used to control the YDP-223 on playback. By transmitting the YDP-223 panel settings and recording them on the MIDI sequence recorder prior to the actual performance data, the YDP-223 will be automatically restored to the same settings when the performance is played back. TERMINOLOGY Setup Data: Data that contains a set of panel settings for the YDP-223. Procedure 1. Set up the panel controls as desired. 2. Connect the YDP-223 to a sequencer via MIDI, and set up the sequencer so it can receive the setup data. 3. Engage Function mode and select . 4. Press the [+/YES] button to transmit the panel/status data. will appear on the LED display when the data has been successfully transmitted. TIP See page 62 for a list of the "Panel Data Contents" transmitted by this function. TIP Receiving the transmitted data: 1. Connect the YDP-223 via MIDI to the device to which the setup data was transmitted previously. 2. Start sending the setup data from the device. The YDP-223 automatically receives the setup data, which will be reflected in the panel settings. (For the data to be accepted, the YDP-223 that receives the setup data should be the same model as the one that transmitted the setup data to the sequencer.) TIP For more information on transmitting and receiving setup data via MIDI, refer to the owner's manual for the connected MIDI device. 42 YDP-223 Detailed Settings - [FUNCTION]