Yamaha YDP-S52 Owner's Manual - Page 12

Setting Up Turning the Power On 1. Connect the plugs of the AC adaptor in the order shown in the illustration. DC IN jack (page 10) DC plug  AC adaptor   Power cord AC plug AC outlet The shape of the plug and outlet differ depending on locale. WARNING Use the specified adaptor (page 33) only. The use of other adaptors may result in irreparable damage to both the adaptor and the instrument. CAUTION Remove the AC plug from the AC outlet when the instrument is not to be used for extended periods of time, or during electrical storms. NOTE Follow this procedure in reverse order when disconnecting the AC adaptor. 2. Press the [1] (Standby/On) switch to turn the power on. [1] (Standby/On) switch Power indicator Power indicator If you close the key cover without turning the power to standby, the power indicator remains lit, indicating that the power is still on. When you're ready to turn the power to standby, press the [1] (Standby/On) switch again for a second. The power indicator turns off. CAUTION Even when the [1] (Standby/On) switch is in the standby status, electricity is still flowing to the instrument at a minimum level. When not using the instrument for an extended period of time, be sure to unplug the power cord from the wall AC outlet. 12 YDP-S52 Owner's Manual