Yamaha YDP-S52 Owner's Manual - Page 32
Connect the AC adaptor., Set the adjuster - review
View all Yamaha YDP-S52 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
Keyboard Stand Assembly 7. Connect the AC adaptor. 7-1 Connect one end of the power cord to the adaptor. 7-2 Insert the AC adaptor plug into the DC IN jack from the rear. 7-2 8. Set the adjuster. After completing the assembly, please check the following. • Are there any parts left over? Review the assembly procedure and correct any errors. • Is this instrument clear of doors and other movable fixtures? Move the instrument to an appropriate location. • Does this instrument make a rattling noise when you shake it? Tighten all screws. • Does the pedal box rattle or give way when you step on the pedals? Turn the adjuster so that it is set firmly against the floor. • Are the pedal cord plug and the adaptor plug inserted securely into the sockets? Check the connection. • If the main unit creaks or is otherwise unsteady when you play on the keyboard, refer to the assembly diagrams and retighten all screws. CAUTION • When moving the instrument after assembly, always hold the bottom of the main unit. • Do not hold the key cover or top portion. Improper handling can result in damage to the instrument or personal injury. Do not hold here. Rotate the adjuster until it comes in firm contact with the floor surface. Hold here. Transporting If you move to another location, you can transport the instrument along with other belongings. You can move the unit as it is (assembled), or you can disassemble the unit down to the condition it was in when you first took it out of the box. Transport the keyboard horizontally. Do not lean it up against a wall or stand it up on its side. Do not subject the instrument to excessive vibration or shock. When transporting the assembled instrument, make sure all screws are properly tightened and have not been loosened by moving the instrument. 32 YDP-S52 Owner's Manual