Yamaha YDP-S52 Owner's Manual - Page 27
Changing the Initial Settings of the Recorded Song, Deleting Recorded Data
View all Yamaha YDP-S52 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Recording Your Performance Changing the Initial Settings of the Recorded Song The settings of the following parameters can be changed after the Record operation is completed. • For individual Parts: Voice, Volume balance (Dual/Duo), Reverb Depth, Damper Resonance • For the entire Song: Tempo, Reverb Type 1. Make the settings of the above parameters. 2. While holding down [REC], press the desired Part button to engage Record Ready mode. After a while, the [REC] lamp and the selected Part lamp will flash at the current tempo. In this status, do not press [PLAY] again or any key. Otherwise, the originally recorded performance data will be deleted. 3. Press [REC] and [PLAY] to exit from Record Ready mode. The [REC], [PLAY], [+R] and [-L] lamps flash. After the Save operation is completed, the lamps will turn off, indicating that the operation has been completed. Confirm the setting by playing the Song. Deleting Recorded Data To delete the entire Song: 1. While holding down [REC], press [DEMO/SONG]. The [+R] and [-L] lamps flash. To exit from this status, press [-L]. 2. Press [+R] to delete the data of the entire Song. The [REC], [PLAY], [+R] and [-L] lamps flash. After the operation is completed, all lamps turn off. To delete a specific Part: 1. While holding down [REC], press [+R] or [-L] (depending on the Part you want to delete) to engage Record Ready mode. The [REC] and the selected Part ([+R] or [-L]) lamps flash. 2. Press [PLAY] to start recording without playing the keyboard. The selected Part ([+R] or [-L]) lamp flashes. 3. Press [REC] or [PLAY] to stop recording. All data recorded for the selected Part will be deleted, and the lamp turns off. 27 YDP-S52 Owner's Manual