Yamaha YDP-V240 Owner's Manual - Page 114
Keyboard Stand Assembly
View all Yamaha YDP-V240 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 114 highlights
Keyboard Stand Assembly CAUTION • Be careful not to confuse parts, and be sure to install all parts in the correct direction. Please assemble in accordance with the sequence given below. • Assembly should be carried out by at least two persons. • Assemble the stand on a hard and flat floor with ample space. • Be sure to use the included screws only, and insert screws of the correct size in the correct hole locations. Do not use any other screws. Use of incorrect screws can cause damage or malfunction of the product. • Be sure to tighten up all screws upon completing assembly of each unit. • To disassemble, reverse the assembly sequence given below. Have a Phillips-head (+) screwdriver ready Remove all parts from the package and make sure you have all of the items. 6 x 20 mm long screws (x 4) A 6 x 16 mm short screws (x 4) Foamed styrol pads B 4 x 12 mm thin screws (x 2) 4 x 20 mm tapping screws (x 4) 4 x 10 mm thin screws (x 2) C Bundled pedal cord inside AC power cord (x 1) Headphone hanger (x 1) D E Cord holders (x 2) Adjuster (x 1) 114 Owner's Manual