Zanussi Z816WT85BI User Manual
Zanussi Z816WT85BI Manual
 |
View all Zanussi Z816WT85BI manuals
Add to My Manuals
Save this manual to your list of manuals |
Zanussi Z816WT85BI manual content summary:
- Zanussi Z816WT85BI | User Manual - Page 1
User Manual GETTING STARTED? EASY. Z816WT85BI EN User Manual Washer Dryer - Zanussi Z816WT85BI | User Manual - Page 2
. The manufacturer is not responsible for any injuries or damages that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference. CHILDREN AND VULNERABLE PEOPLE SAFETY WARNING! Risk of suffocation, injury or permanent - Zanussi Z816WT85BI | User Manual - Page 3
utility. • Ensure good air ventilation in the room where the appliance is installed to avoid the backflow of unwanted gases into the room from appliances burning new supplied hose sets, or other new hose sets supplied by the Authorised Service Centre. • Old hose sets must not be reused. • If the - Zanussi Z816WT85BI | User Manual - Page 4
the appliance and disconnect the mains plug from the socket. SAFETY INSTRUCTIONS INSTALLATION The installation must comply with relevant national regulations. • Follow the installation instructions supplied with the appliance. • Do not install or use the appliance where the temperature can be less - Zanussi Z816WT85BI | User Manual - Page 5
• Do not install or use a damaged appliance. • Do not install the appliance where the to dry in the washer dryer. Follow the cleaning instruction on the item label. • Plastic items are not in the appliance. SERVICE • To repair the appliance contact an Authorised Service Centre. • Use original - Zanussi Z816WT85BI | User Manual - Page 6
x1 x1 F G H L x1 x2 x1 x1 x1 x2 UNPACKING WARNING! Use the gloves. WARNING! Remove all the packaging and the transit bolts before installing the appliance. 1. Put two polystyrene packaging elements on the floor under the appliance. WARNING! It is strongly recommended that this action is - Zanussi Z816WT85BI | User Manual - Page 7
3. Remove the polystyrene protection from the 1 bottom. 2 4. Return the appliance in vertical position and 1 remove the socket polystyrene protection. 2 5. Remove the power supply cable and the drain hose from the hose holders. It is possible to see water flowing from the drain hose. This is - Zanussi Z816WT85BI | User Manual - Page 8
plastic caps you find in the user manual bag. Put the smallest cap F in upper hole and the two bigger caps G in low- F er holes. G We recommend that you keep the packaging and the transit bolts for any movement of the appliance. INSTALLATION ON SUSPENDED FLOORING Suspended wooden floors are - Zanussi Z816WT85BI | User Manual - Page 9
HOSE AND CABLE CONNECTION 1020 mm 1100 mm 1450 mm 760 mm max 1000 mm min. 600 mm min. 600 mm max 1000 mm 900 mm The inlet hose 45O 20O 1360 mm 1. Remove the inlet hose from inside the drum. 2. To connect the water inlet hose towards the proper direction and with the proper inclination, check - Zanussi Z816WT85BI | User Manual - Page 10
from the couplings. Use the hose supplied with appliance. Do not use an extension hose if the inlet hose is too short. Contact the Authorised Service Centre for an inlet hose replacement. Water drainage The drain hose can be connected: Ø 40 mm To a stand pipe with vent-hole Directly into a drain - Zanussi Z816WT85BI | User Manual - Page 11
pipe in the room wall and L tighten it with the supplied cable tie L. You can extend the drain hose to maximum 400 cm. Contact the service centre for the other drain hose and the extension. BUILDING IN min.600 mm min. 560 mm min. 820 mm 16-22 mm This appliance - Zanussi Z816WT85BI | User Manual - Page 12
sure they are not kinked or squashed. INSTALLING ANTI-TILTING DEVICE If the height of the counter is 820 mm or lower, you cannot install the anti-tilting device. 1. Remove the screws of the top cover on the rear of the appliance and install the anti-tilting device as shown in the drawing. ~10mm 2. - Zanussi Z816WT85BI | User Manual - Page 13
before the appliance is built in completely. If the cupboard door has to be opened from left to N right, invert the position of the hinge supports M with the magnetic plate N and lower plate O. M O M N O Make sure that the plate with magnet is on the upper position. 13 - Zanussi Z816WT85BI | User Manual - Page 14
of the hole to countersink the upper hinge. The centre of the hole Y should be at the same height of the stroke on the hinge support. Set the position of the lower hole respecting dimensions and distances shown in the drawing (449 mm). Countersink the holes. Hinges To mount the hinges - Zanussi Z816WT85BI | User Manual - Page 15
Mounting the door Fix the hinges to the hinge supports on the appliance by means of the two supplied screws B. The hinges can be the mark as described in the first step. 10 11 12 1 Hinge supports 2 Detergent dispenser 3 Control panel 4 5 6 7 8 9 4 Magnetic plate 5 Door handle 6 Rating plate 13 15 - Zanussi Z816WT85BI | User Manual - Page 16
7 Plate with rubber beater 8 Drain pump filter 9 Front feet for levelling the appliance 10 Drain hose CONTROL PANEL CONTROL PANEL DESCRIPTION 1 11 Mains cable 12 Inlet hose connection 13 Back feet for levelling the appliance 2 34 5 12 11 10 9 8 7 6 The permanent options are set by holding - Zanussi Z816WT85BI | User Manual - Page 17
DISPLAY Door locked indicator. The digital indicator can show: • Programme duration (e. g. • Delay time (e. g. ). • Cycle end ( ). • Warning code (e.g. ). • Error indicator ( ). Flextime indicator. , washing and/or drying phase). Extra Rinse indicator. The spin area: Spin speed - Zanussi Z816WT85BI | User Manual - Page 18
DIAL AND BUTTONS INTRODUCTION The options/functions are not available with all washing programmes. Check the compatibility between options/ functions and washing programmes in the "Programme Chart". An option/ function can exclude another one, in this case the appliance doesn't allow you to set - Zanussi Z816WT85BI | User Manual - Page 19
FLEXTIME With this option you can reduce the programme duration depending on the load size and the degree of soiling. When you set a washing programme, the display shows the default duration and dashes. Touch Flextime button to reduce the programme duration according to your needs. The display - Zanussi Z816WT85BI | User Manual - Page 20
PROGRAMMES PROGRAMME CHART Programme Default temperature Temperature range Reference spin speed Spin speed range Maximum load Programme description (Type of load and soil level) Washing programmes Cottons 40 °C 90 °C - Cold 1600 rpm (1600400 rpm) Cottons Eco1) 40 °C 60 °C - 40 °C 1600 rpm ( - Zanussi Z816WT85BI | User Manual - Page 21
Programme Default temperature Temperature range Reference spin speed Spin speed range Maximum load Machine Clean 60 °C 1200 rpm (1200 400 rpm) - Daily Wash 40 °C 60 °C - Cold Sportswear 30 °C 40 °C - Cold Outdoor 30 °C 40 °C - Cold 1200 rpm 3 kg (1200 400) 1200 rpm 3 kg (1200400 rpm) 1200 rpm - Zanussi Z816WT85BI | User Manual - Page 22
Programme Default temperature Temperature range Reference spin speed Spin speed range Maximum load Programme description (Type of load and soil level) NonStop 60min 30 °C 40 °C - 30 °C 1200 rpm 1 kg Mixed fabrics (cotton and synthetic items). Complete short programme to wash and dry laundry - Zanussi Z816WT85BI | User Manual - Page 23
Spin No Spin Prewash Flextime Delay Start Programme Machine Clean Daily Wash Sportswear ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ Outdoor ■ ■ ■ ■ ■ Denim ■ ■ ■ ■ ■ NonStop 60min ■ 1) If you set the No Spin option, the appliance performs draining only. AUTOMATIC DRYING Dryness - Zanussi Z816WT85BI | User Manual - Page 24
Dryness Level Type of fabric Load 1) Cupboard Dry2) For items to be stored Cottons and Linen (bathrobes, bath towels, etc) Synthetics and mixed fabrics (jumpers, blouses, underwear, household and bed linen) up to 4 kg up to 3 kg Delicate fabrics (acrylics, viscose and delicate mixed fabrics) - Zanussi Z816WT85BI | User Manual - Page 25
Dryness Level Type of fabric Load (kg) Spin speed (rpm) Suggested duration (mins) Cupboard Dry For items to be stored Cottons and Linen (bathrobes, bath towels, etc) Iron Dry Suitable for ironing Synthetics and mixed fabrics (jumpers, blouses, underwear, household and bed linen) Delicates ( - Zanussi Z816WT85BI | User Manual - Page 26
leakage and damage to the laundry. Washing heavily oiled, greasy stains could cause damage to rubber parts of the washing machine. Always follow the instructions that you find on the packaging of the detergent products, but we recommend that you do not exceed the maximum indicated level ( ). This - Zanussi Z816WT85BI | User Manual - Page 27
2. Press the lever down to remove the dispenser. 3. To use powder detergent, turn the flap up. 4. To use liquid detergent, turn the flap down. With the flap in the position DOWN: • Do not use gelatinous or thick liquid detergents. • Do not exceed to liquid detergent dose indicated on the flap. • Do - Zanussi Z816WT85BI | User Manual - Page 28
Changing the delay start after the countdown has started To change the delay start: 1. Touch the Start/Pause button to pause the appliance. The related indicator flashes. 2. Touch the Delay Start button repeatedly until the display shows the desired delay time. 3. Touch the Start/Pause button again - Zanussi Z816WT85BI | User Manual - Page 29
END OF THE PROGRAMME When the programme has finished, the appliance stops automatically. The acoustic signals operate (if they are active). The display shows The indicator of the Start/Pause off. button goes The door unlocks and the indicator goes off. 1. Press button On/Off to deactivate the - Zanussi Z816WT85BI | User Manual - Page 30
2. Set the NonStop 60min programme by means of the programme dial. 3. Touch the Start/Pause programme. button to start the Non-automatic wash&dry programmes In some washing programmes, you can combine Mode - Wash and Mode - Dry for running a complete wash&dry programme. Proceed as follows: 1. - Zanussi Z816WT85BI | User Manual - Page 31
PREPARATION TO DRYING 1. Press the On/Off button for some seconds to activate the appliance. 2. Load the laundry one item at a time. 3. Turn the programme dial to the programme suitable for the items to dry. The appliance defaults to the washing only mode and the indicator of the Mode - Wash button - Zanussi Z816WT85BI | User Manual - Page 32
, delicates and wool. • Follow the washing instructions on the laundry care labels. • Do not etc. ). • A very small load can cause balance problems with the spin phase leading to excessive vibration. If (refer to "Daily Use" chapter); b. manually redistribute the load so that the items are spaced - Zanussi Z816WT85BI | User Manual - Page 33
tap. • Check if the drain hose is connected properly. Refer to installation chapter for more information. • For the maximum laundry load of the with an empty drum and a descaling product occasionally. Always follow the instructions that you find on the packaging of the product. MAINTENANCE WASH The - Zanussi Z816WT85BI | User Manual - Page 34
water containing iron Clean the drum with special products for stainless steel. Always follow the instructions that you find on the packaging of the product. Do not clean the drum with clean the recess. 4. Insert the detergent drawer into the guide rails and close it. Run the rinsing programme 34 - Zanussi Z816WT85BI | User Manual - Page 35
without any clothes in the drum. CLEANING THE DRAIN PUMP WARNING! Disconnect the mains plug from the mains socket. Proceed as follows to clean the pump: Regularly check the drain pump filter and make sure that it is clean. Clean the drain pump if: • The appliance does not drain the water. • The - Zanussi Z816WT85BI | User Manual - Page 36
fluff and objects from the filter recess. Make sure that the impeller of the pump can rotate. If it does not rotate, contact the Authorised Service Centre. 8. Clean the filter under the water tap. 36 - Zanussi Z816WT85BI | User Manual - Page 37
2 9. Put the filter back into the special guides by turning it clockwise. Make sure that you tighten the filter correctly to prevent leakages. 1 2 1 10. Close the pump cover. When you drain the water - Zanussi Z816WT85BI | User Manual - Page 38
installed in an area where the temperature can reach values around 0° C or drop below, remove the remaining water from the inlet hose and the drain pump. TROUBLESHOOTING a solution to the problem (refer to the table). If the problem persists, contact the Authorised Service Centre. WARNING! Deactivate - Zanussi Z816WT85BI | User Manual - Page 39
is in the correct position. The hose may be positioned too low. Refer to "Installation instruction". • Make sure that the sink spigot is not clogged. • Make sure that the Care and cleaning". • Adjust manually the items in the tub and start the spin phase again. This problem may be caused by balance - Zanussi Z816WT85BI | User Manual - Page 40
problem may be caused by a failure of the appliance. Contact the Authorised Service Centre. If you need to open the door, please read carefully "Emergency door opening". • Make sure the levelling of the appliance is correct. Refer to "Installation instruction given in this user manual. • Turn the - Zanussi Z816WT85BI | User Manual - Page 41
Centre. If the display shows other alarm codes, deactivate and activate the appliance. If the problem continues, contact the Authorised Service Centre. EMERGENCY DOOR OPENING In case of power failure or functioning failure the appliance door remains locked. The washing programme continues when - Zanussi Z816WT85BI | User Manual - Page 42
Programmes Load (kg) Energy consumption (kWh) Water consumption (litre) Approximate programme duration (mi- nutes) Cottons 40°C 8 0.89 80 185 Synthetics 40°C 3 0.59 71 135 Delicates 40°C 2 0.30 47 60 Wool/Handwash 30°C 1.5 0.15 58 70 1) «Cotton Energy Saving programme » at - Zanussi Z816WT85BI | User Manual - Page 43
43 - Zanussi Z816WT85BI | User Manual - Page 44
157019970-B-292018 WWW.ZANUSSI.COM/SHOP
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
 |
 |
GETTING
STARTED?
EASY.
User Manual
Z816WT85BI
EN
User Manual
Washer Dryer