Zanussi Z816WT85BI User Manual - Page 27

Starting A Programme With The Delay

Get Zanussi Z816WT85BI PDF manuals and user guides View all Zanussi Z816WT85BI manuals
Add to My Manuals
Save this manual to your list of manuals

Page 27 highlights

2. Press the lever down to remove the dispenser. 3. To use powder detergent, turn the flap up. 4. To use liquid detergent, turn the flap down. With the flap in the position DOWN: • Do not use gelatinous or thick liquid detergents. • Do not exceed to liquid detergent dose indicated on the flap. • Do not set the prewash phase. • Do not set the delay start function. 5. Measure out the detergent and the fabric conditioner. 6. Carefully close the detergent dispenser. Make sure that the flap does not cause a blockage when you close the drawer. SETTING A PROGRAMME 1. Turn the programme dial to select the desired washing programme. The indicator of Mode - Wash button illuminates. The indicator of the Start/Pause button flashes. The display shows an indicative programme duration and the maximum load. 2. To change the temperature and/or the spin speed, touch the related buttons. 3. If desired, set one or more options by touching the related buttons. The related indicators illuminate on the display and the given information changes accordingly. If a selection is not possible an acoustic signal sounds and the display shows . STARTING A PROGRAMME Touch the Start/Pause button to start the programme. It is not possible to start the programme when the indicator of the button is off and doesn't flash (e.g. the door is open). The related indicator stops flashing and stays on. The programme starts, the door is locked. The display shows the indicator . The drain pump can operate shortly before the appliance fills water. STARTING A PROGRAMME WITH THE DELAY START 1. Touch the Delay Start button repeatedly until the display shows the desired delay time. The related indicator comes on. 2. Touch the Start/Pause button. The appliance door locks and starts the countdown of the delay start. The display shows the indicator . When the countdown is completed, the programme starts automatically. Cancelling the delay start after the countdown has started To cancel the delay start: 1. Touch the Start/Pause button to pause the appliance. The related indicator flashes. 2. Touch the Delay Start button repeatedly until the display shows . 3. Touch the Start/Pause button again to start the programme immediately. 27

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
2.
Press the lever down to remove the dispenser.
3.
To use powder detergent, turn the flap up.
4.
To use liquid detergent, turn the flap down.
With the flap in the position
DOWN
:
•
Do not use gelatinous or thick liquid
detergents.
•
Do not exceed to liquid detergent dose
indicated on the flap.
•
Do not set the prewash phase.
•
Do not set the delay start function.
5.
Measure out the detergent and the fabric
conditioner.
6.
Carefully close the detergent dispenser.
Make sure that the flap does not cause a blockage
when you close the drawer.
SETTING A PROGRAMME
1.
Turn the programme dial to select the desired
washing programme.
The indicator of Mode - Wash button illuminates.
The indicator of the Start/Pause
button flashes.
The display shows an indicative programme
duration and the maximum load.
2.
To change the temperature and/or the spin
speed, touch the related buttons.
3.
If desired, set one or more options by touching
the related buttons. The related indicators
illuminate on the display and the given
information changes accordingly.
If a selection is
not possible
an
acoustic signal sounds and the display
shows
.
STARTING A PROGRAMME
Touch the Start/Pause
button to start the
programme. It is not possible to start the
programme when the indicator of the button is off
and doesn't flash (e.g. the door is open).
The related indicator stops flashing and stays on.
The programme starts, the door is locked. The
display shows the indicator
.
The drain pump can operate shortly
before the appliance fills water.
STARTING A PROGRAMME WITH THE DELAY
START
1.
Touch the Delay Start button repeatedly until
the display shows the desired delay time. The
related indicator comes on.
2.
Touch the Start/Pause
button. The
appliance door locks and starts the countdown
of the delay start. The display shows the
indicator
.
When the countdown is completed, the programme
starts automatically.
Cancelling the delay start after the
countdown has started
To cancel the delay start:
1.
Touch the Start/Pause
button to pause the
appliance. The related indicator flashes.
2.
Touch the Delay Start button repeatedly until
the display shows
.
3.
Touch the Start/Pause
button again to
start the programme immediately.
27