ZyXEL Elite 2864I User Guide - Page 116
Extended AT& Command Set
View all ZyXEL Elite 2864I manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 116 highlights
+++ Escape sequence code, entered in data state, wait for modem to return to command state. $ Basic command summary help. &$ Extended AT& command summary help. *$ Extended AT* command summary help. Extended AT& Command Set &B0 + &B1 &C0 + &C1 &D0 &D1 + &D2 &D3 &F + &G0 &G1 &G2 &H0 &H1 &H2 + &H3 &H4 &H5 + &J0 &J1 DTE/DCE rate follows link rate. (If the communication software package has auto baud rate detection, please turn it ON.) (See also S44b6) Fixes the DTE/DCE to the DTE setting, range from 300 bps to 460.8 Kbps. (Default) (See also S18, S20, S44b6) Assumes that the carrier is always present; forces CD to always remain ON. CD tracks presence of carrier. (Default) (See also S38b3 and S42b7) Ignores DTR signal, assumes DTR to always remain ON. 108.1, DTR OFF-ON transition causes dial of the default number. (See also *Dn) 108.2, Data Terminal Ready, DTR OFF causes the modem to hang up and return to command state. (Default) Same as &D2, but DTR OFF also causes the loading of and reset with data from profile 0. Loads factory settings to RAM as active configuration. No guard tone (within the USA, Canada). (Default) Reserved. 1800 Hz guard tone. Disables flow control. Reserved. Reserved. Hardware CTS/RTS flow control. (Default) Software XON/XOFF flow control. Reserved. Single phone line RJ11 phone jack. (Default) Multiple-phone/modem line RJ12/RJ13 phone jack. 9-6