ZyXEL MAX218M2W User Guide - Page 162
Table 71, LABEL, DESCRIPTION, The VoIP Account Screens
View all ZyXEL MAX218M2W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 162 highlights
Chapter 10 The VoIP Account Screens Table 71 Server (continued) LABEL SIP Service Domain DESCRIPTION Enter the IP address or domain name of a SIP server, if your VoIP service provider gave you one. Register Period Time Otherwise, enter the same address that you have entered in the Registrar Server field. You can use up to 63 printable ASCII characters. Enter the registration expiry time in seconds for the SIP account specified in Section 10.4 on page 163. The allowable range is 60~65535 seconds. However, this value is just a default preference value by user, the actual registration expiry time used by the SIP account is determined by the registrar server after the registration process. Once the SIP account has registered at the registrar server successfully, the WiMAX Device will send a re-register message to keep alive the successfully registered status at every half of the registration expiry time determined by the registrar server. Proxy Server Proxy Server Port Number Outbound Server Outbound Server Port Number If the keep-alive action failed, the register status described in Section 10.2 on page 160 will become Error state and you can not make any call in this status. However, after 512 seconds (fixed value), the WiMAX Device will send a register message again to try to recover a successfully registered status. Enter the IP address or domain name of the SIP proxy server provided by your VoIP service provider. You can use up to 63 printable ASCII characters. Enter the SIP proxy server's listening port number, if your VoIP service provider gave you one. Otherwise, keep the default value. Enter the IP address or domain name of the outbound proxy server provided by your VoIP service provider. You can use up to 63 printable ASCII characters. If you choose not to use an outbound proxy server, set this to 0.0.0.0. Enter the outbound proxy's listening port number, if your VoIP service provider gave you one. Otherwise, leave it as the default '5060'. If the outbound proxy is disabled (set to 0.0.0.0), then this port will be ignored. 162 WiMAX Device Configuration User's Guide