ZyXEL MAX218M2W User Guide - Page 28
WiMAX Authentication Settings, Table 6, LABEL, DESCRIPTION, By Range, Setting Type
View all ZyXEL MAX218M2W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Chapter 3 Setup Wizard The following table describes the labels in this screen. Table 6 Setup Wizard > WiMAX Frequency Settings LABEL Setting Type DESCRIPTION Select the WiMAX frequency setting type from the list. Step • By Range - Select this to set up the frequency based on a range of MHz. • By List - Select this to set up the frequency on an individual MHz basis. You can add multiple MHz values to the list. Enter the increments in MHz by which to increase the frequency range. Start Frequency Note: This field only appears when you select By Range under Setting Type. Enter the frequency value at the beginning of the frequency range to use. The frequency is increased in increments equal to the Step value until the End Frequency is reached, at which time the cycle starts over with the Start Frequency. End Frequency Note: This field only appears when you select By Range under Setting Type. Enter the frequency value at the end of the frequency range to use. Bandwidth # Frequency (MHz) Total Num Delete Add OK # Band Start (KHz) Band End (KHz) Total Num Back Next Note: This field only appears when you select By Range under Setting Type. Set the frequency bandwidth in MHz that this WiMAX Device uses. This is an index number for enumeration purposes only. Displays the frequency MHz for the item in the list. Displays the total number of items in the list. Click this to remove an item from the list. Click this to add an item to the list. Click this to save an newly added item to the list. This is an index number for enumeration purposes only. Indicates the beginning of the frequency band in KHz. Indicates the end of the frequency band in KHz. Displays the total number of items in the list. Click to display the previous screen. Click to proceed to the next screen. 3.1.4 WiMAX Authentication Settings The WiMAX Authentication Settings screen allows you to configure how your WiMAX Device logs into the service provider's network. Note: These settings should be provided by your ISP. Note: The EAP supplicant settings on this screen vary depending on the authentication mode your select. 28 WiMAX Device Configuration User's Guide