ZyXEL MAX218M2W User Guide - Page 59
ZyXEL MAX218M2W Manual
View all ZyXEL MAX218M2W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
Chapter 4 Tutorials Note: You will need to configure the VLAN supporting switches to tag the received packets with the appropriate VLAN IDs. For example, packets received on switch S1 from PC C on the LAN would be tagged to VLAN 10. Figure 20 VLAN Configuration Example 5 No VLAN Tag A VLAN TagID = 5 VLAN TagID = 5 S1 No VLAN Tag B VLAN TagID = 10 VLAN TagID = 10 No VLAN Tag C User Network No VLAN Tag PC Manager IP: Enable VLAN LAN: Transparent CPE VLAN Tag ID=10 Note: Manager IP VLAN ID is different from the LAN transparent VLAN ID LAN VLAN Tag ID=5 VLAN Tag ID=10 Manager IP VLAN Tag ID=5 Network operators 1 Configure the Link Type, PVID and Tag/Untag settings for the interfaces as below by clicking each row. Then press OK. WiMAX Device Configuration User's Guide 59