ZyXEL MAX218M2W User Guide - Page 52
Scenario 2, In this scenario, PC A and PCare on VLAN 5
View all ZyXEL MAX218M2W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
Chapter 4 Tutorials 1 Configure the Link Type, PVID and Tag/Untag settings for the interfaces as below by clicking each row. Then press OK. 2 Next, configure the Name, VID and Ports for the Filter Setting. The WiMAX Device will tag packets it receives on each interface so that they are recognized in VLAN 5. Tagged packets will be untagged when they are forwarded out of each interface since the devices attached to these interfaces do not support VLAN tagged packets. 4.12.2 Scenario 2 In this scenario, PC A and PC C are on VLAN 5, while PC B and PC D are on VLAN 10. PC A and PC B are connected to interface LAN1 through VLAN supporting switch S1. PC C is connected to interface WiMAX and interface IAD for managing the WiMAX Device, through VLAN supporting switch S2. PC D is connected to interface WiMAX through VLAN supporting switch S2. 52 WiMAX Device Configuration User's Guide