ZyXEL NWA1121-NI User Guide - Page 30
ZZ AA BB, Tutorial, NWA1121-NI User's Guide
View all ZyXEL NWA1121-NI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
Chapter 4 Tutorial 6.4.4 on page 69) to provide multiple wireless networks. Each wireless network will cater to a different type of user. You want to make three wireless networks: one standard office wireless network with all the same settings you already have, another wireless network with high priority QoS settings for Voice over IP (VoIP) users, and a guest network that allows visitors to access only the Internet and the network printer. To do this, you will take the following steps: 1 Edit the SSID profiles. 2 Change the operating mode from Root AP to MBSSID and reactivate the standard network. 3 Configure different security modes for the networks. 4 Configure a wireless network for standard office use. 5 Configure a wireless network for VoIP users. 6 Configure a wireless network for guests to your office. The following figure shows the multiple networks you want to set up. Your NWA1121-NI is marked Z, the main network router is marked A, and your network printer is marked B. B A Z The standard network (SSID01) has access to all resources. The VoIP network (VoIP_SSID) has access to all resources and a high QoS priority. The guest network (Guest_SSID) has access to the Internet and the network printer only, and a low QoS priority. 30 NWA1121-NI User's Guide