ZyXEL PLA402 v2 Quick Start Guide - Page 7
Within, Press, 15 Sec
View all ZyXEL PLA402 v2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
ENGLISH 3 Press the ENCRYPT buttons at the rear of your powerline devices for 1~2 seconds A PRESS 10~15 SEC. B PRESS 2 SEC. WITHIN 120 SEC. C PRESS 2 SEC. 4 While the devices are connecting, the power ( ) and HomePlug ( ) lights blink. Also several times all lights blink at the same time and the HomePlug ( ) light shows red. 5 Wait for about one minute while your powerline devices connect. The power ( ) light is steady when the ENCRYPT process times out, the HomePlug ( ) light is steady if you have a successful connection. V If the power ( ) light does not blink, you have probably pressed the ENCRYPT button for too long. Try again, pressing the ENCRYPT button for 1~2 seconds. V If the HomePlug ( ) lights on both powerline devices do not light up, the powerline devices are not connected. Repeat steps 2 and 3 in this section. If that doesn't work, see the User's Guide for more suggestions. 7