ZyXEL PLA450 v2 User Guide - Page 123
Product Specifications and Wall- Mounting Instructions
View all ZyXEL PLA450 v2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 123 highlights
CHAPTER 15 Product Specifications and WallMounting Instructions The following tables summarize the PLA450's hardware and firmware features. Table 36 Hardware Features Dimensions (W x D x H) 162 x 118 x 35 mm Power Specification 120-240 VAC, 50/60 Hz Ethernet port Auto-negotiating: This auto-negotiation feature allows the PLA450 to detect the speed of incoming transmissions and adjust appropriately without manual intervention. It allows data transfer of either 10 Mbps or 100 Mbps in either half-duplex or full-duplex mode depending on your Ethernet network. Auto-crossover: Use either crossover or straight-through Ethernet cables. Reset Button The reset button is built into the rear panel. Use this button to restore the PLA450 to its factory default settings. Press for 1 second to restart the device. Press for 5 seconds to restore to factory default settings. Antenna The PLA450 is equipped with a 2dBi detachable antenna to provide clear radio transmission and reception on the wireless network. Operation Environment Temperature: 0º C ~ 45º C Humidity: 5% ~ 95% RH (Noncondensing) Storage Environment Temperature: -10º C ~ 70º C Humidity: 10% ~ 85% RH (Noncondensing) Distance between the centers of the holes on the device's back. 115 mm Screw size for wallmounting use M3 screws made of plastic (not included) Table 37 Firmware Features FEATURE DESCRIPTION Default IP Address 192.168.1.2 Default Subnet Mask 255.255.255.0 (24 bits) Default Password 1234 DHCP Pool 192.168.1.33 to 192.168.1.64 Device Management Use the web configurator to easily configure the rich range of features on the PLA450. PLA450 User's Guide 123