eMachines G630 Service Guide - Page 110
Replacing the Power Board, the Upper Cover.
View all eMachines G630 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 110 highlights
Replacing the Power Board 1. Slide the Power Board in to the Upper Cover front edge first to engage the securing clip. 2. Press the board down to locate the securing pin. 3. Replace the two (2) screws to secure the board to the Upper Cover. Replacing the Upper Cover 1. Place the Upper Cover on the Lower Cover as shown. 100 Chapter 3
100
Chapter 3
Replacing the Power Board
Replacing the Upper Cover
1.
Slide the Power Board in to the Upper Cover front edge first to engage the securing clip.
2.
Press the board down to locate the securing pin.
3.
Replace the two (2) screws to secure the board to
the Upper Cover.
1.
Place the Upper Cover on the Lower Cover as shown.