2008 Acura MDX Owner's Manual - Page 25

Main Menu Table Of Contents Additional Information About Your Seat Belts If the indicator comes on or the beeper sounds when the driver's seat belt is latched and there is no front seat passenger and no items on the front seat, something may be interfering with the monitoring system. Look for and remove: Any items under the front passenger's seat. Any object(s) hanging on the seat or in the seat-back pocket. Any object(s) touching the rear of the seat-back. If no obstructions are found, have your vehicle checked by a dealer. Lap/Shoulder Belt The lap/shoulder belt goes over your shoulder, across your chest, and across your hips. To fasten the belt, insert the latch plate into the buckle, then tug on the belt to make sure the buckle is latched (see page 15 for how to properly position the belt). To unlock the belt, press the red PRESS button on the buckle. Guide the belt across your body so that it retracts completely. After exiting the vehicle, be sure the belt is out of the way and will not get closed in the door. All seat belts have an emergency locking retractor. In normal driving, the retractor lets you move freely in your seat while it keeps some tension on the belt. During a collision or sudden stop, the retractor automatically locks the belt to help restrain your body. The seat belts in all positions except the driver's have a lockable retractor that must be activated to secure a child seat (see page 50 ). If the shoulder part of the belt is pulled all the way out, the lockable retractor will activate. The belt will retract, but it will not allow the passenger to move freely. To deactivate the lockable retractor, unlatch the buckle and let the seat belt fully retract. To refasten the seat belt, pull it out only as far as needed. Driver and Passenger Safety CONTINUED 21 2008 MDX