2008 Acura MDX Owner's Manual - Page 442
2008 Acura MDX Manual
Page 442 highlights
Main Menu Table Of Contents Brake System Indicator The brake system indicator normally comes on when you turn the ignition switch to the ON (II) position, and as a reminder to check the parking brake. It will stay on if you do not fully release the parking brake. If the brake system indicator comes on while driving, the brake fluid level is probably low. Press lightly on the brake pedal to see if it feels normal. If it does, check the brake fluid level the next time you stop at a service station (see page 401 ). You will also see a ''LOW BRAKE FLUID'' message on the multiinformation display (see page 81 ). U.S. Canada If the fluid level is low, take your vehicle to a dealer, and have the brake system inspected for leaks or worn brake pads. However, if the brake pedal does not feel normal, you should take immediate action. A problem in one part of the system's dual circuit design will still give you braking at two wheels. You will feel the brake pedal go down much farther before the vehicle begins to slow down, and you will have to press harder on the pedal. You will also see a ''CHECK BRAKE SYSTEM'' message on the multiinformation display (see page 81 ). Slow down by shifting to a lower gear, and pull to the side of the road when it is safe. Because of the long distance needed to stop, it is hazardous to drive the vehicle. You should have it towed, and repaired as soon as possible (see Emergency Towing on page 446 ). If you must drive the vehicle a short distance in this condition, drive slowly and carefully. If the ABS indicator and the VSA system indicator come on with the brake system indicator, have your vehicle inspected by your dealer immediately. 438 2008 MDX