2006 BMW X3 Owner's Manual - Page 47
2006 BMW X3 Manual
Page 47 highlights
5. Press button 2 to confirm the time. The set time is transferred to the display of the radio or displayed in the instrument cluster. Outside temperature Display mode Ignition key in position 0 or removed: Press button 1. The time and display of the miles/kilometers appear for a few seconds. Computer* Mode selection Changing unit of measure 7/6 During the display, hold down the button in the turn signal lever until the display changes. Controls Reference Mobility Driving tips Outside temperature warning If the outside temperature falls below approx. +37.5 7/+3 6, the computer switches automatically to the outside temperature display. In addition, an acoustic signal sounds and the display flashes for a short time. There is an increased risk of icy conditions. After an outside temperature warning has been issued, the display returns to the previous setting. You can have this activated/ deactivated.< Ice can also occur at temperatures greater than +37,5 7/+3 6. For this reason, drive carefully on bridges and shaded roadways, for example. Otherwise, there is an increased risk of accidents.< As of ignition key position 1, you can call up information from the computer using the computer button in the turn signal lever. A new function appears each time you briefly press the computer button. The following information is displayed in the sequence indicated: > Time > Outside temperature > Average fuel consumption > Cruising range > Average speed As of ignition key position 1, the last active setting is displayed. If you wish, you can display the following functions in a different unit of measure.< Clock 12 or 24 hour mode If your vehicle is equipped with a computer, you can have the time displayed in the 12 or 24 hour mode. 45 Online Edition for Part No. 01 41 0 012 213 - © 02/06 BMW AG At a glance