2007 BMW 7 Series Owner's Manual - Page 70
2007 BMW 7 Series Manual
Page 70 highlights
Driving Maintaining speed, storing, and decelerating Pull the lever, arrow 2: Functions in the same way as 1, except that the vehicle speed is decreased. lever until you have reached your desired speed: > Press or pull the lever to the resistance point again: the pointer slowly moves. > Press or pull the lever past the resistance point again: the pointer jumps to the next multiple of 5 mph or 10 km/h and then further, as long as the lever is held. 3. Press the button 4 for approx. 3 seconds. The stored desired speed is indicated by a mark 6. If six desired speeds have already been stored, please delete at least one of them before adding another. Interrupting the cruise control Briefly press the lever up or down, arrow 3. In addition, cruise control is interrupted automatically: > when you apply pressure to the brake pedal > when you shift the automatic transmission into position N > when the DSC control is operative Resuming stored speed Briefly press the button 4: The vehicle accelerates back to and maintains the stored speed. While driving 1. Press, arrow 1, or pull, arrow 2, the lever past the resistance point. 2. Press the button 4 for approx. 3 seconds. The current speed is applied as the desired speed and displayed with 6. If all of the marks 6 flash twice, this indicates that six desired speeds have already been stored. You must then delete at least one of them before adding another. Displays in speedometer Deleting desired speeds 1. Select corresponding desired speed 6, refer to section below. 5 Pointer for stored speed > > 6 Cruise control activated Cruise control deactivated 2. Press button 4 for approx. 3 seconds. Activating multilevel preset mode Press, arrow 1, or pull, arrow 2, the lever past the resistance point. The current driving speed is maintained, stored and displayed by the pointer 5. Mark for stored desired speed in the multilevel function Storing desired speeds With vehicle stationary 1. Switch on the ignition. 2. Press, arrow 1, or pull, arrow 2, the lever past the resistance point: Now you can move the pointer 5 with the Selecting desired speed Press, arrow 1, or pull, arrow 2, the lever past the resistance point: The next desired speed is selected. 68 Online Edition for Part no. 01 41 0 013 316 - © 02/07 BMW AG