2007 BMW 7 Series Owner's Manual - Page 84
2007 BMW 7 Series Manual
Page 84 highlights
Everything under control 4. Select a message and press the controller. Speed limit You can enter a speed and a Check Control message will indicate when you have reached this speed. This enables you, for example, to receive warnings if you exceed a speed limit in an urban area. You are only warned of reaching this speed a second time if your speed has dropped to at least 3 mph/5 km/h slower than this speed limit since the last warning. To exit the menu: The arrow is selected. Press the controller. Displaying, adjusting, or changing limit iDrive, for principle details, refer to page 16. 1. Press the menu. button to open the start Display of malfunction urgency Depending on the status of the monitored systems, the symbol in the status line is displayed in different colors. 2. Move the controller toward "Car Data". 3. Select "Limit" and press the controller. 4. Select "SET" and press the controller. Yellow or red Malfunctions are present in the monitored systems. Depending upon how serious the problem is, a supplementary message may also appear on the Control Display. The symbol also indicates the status of the service requirements, refer to Symbols on page 79. Displays after trip completion Selected malfunction reports generated during the trip are shown again consecutively when you switch off the ignition. Even with the ignition and display off, you can display the messages on the Info Display: Press the CHECK button for approx. 8 seconds, refer to page 81. The stored status reports appear again in the display. If several messages are present, you can continue to briefly press the CHECK button to view them in succession. The Check Control function is terminated: > automatically after a brief period > if you press the CHECK button again for approx. 8 seconds. 5. Turn the controller to adjust the limit. 6. Press the controller to save the setting. Applying your current speed as limit Select and press the controller. The system applies your current speed as the limit. Activating/deactivating limit Select "ON / OFF" and press the controller. When the speed limit is switched on, "ON / OFF" is highlighted. 82 Online Edition for Part no. 01 41 0 013 316 - © 02/07 BMW AG