2008 BMW M3 Owner's Manual - Page 53
2008 BMW M3 Manual
Page 53 highlights
P Park P engages automatically when you switch off the engine unless N is engaged and the remote control remains in the ignition lock, refer to page 46. As soon as you remove the remote control from the ignition lock, P engages regardless of the position of the selector lever.< Via the shift paddles on the steering wheel At a glance > To shift up, pull the right-hand shift paddle + briefly. > To shift down, pull the left-hand shift paddle - briefly. Displays in the instrument cluster Unlocking the transmission lock manually 1 2 Engaged gear 1 to 7, R, N, P Selected drive program, corresponds to the number of illuminated fields, refer to Drivelogic, page 52 The gear currently engaged is displayed together with a D in drive mode If a power failure occurs, e.g. if the battery is discharged or disconnected, the transmission lock must be released manually, otherwise the rear wheels are blocked and the vehicle cannot be towed.< At very low outside temperatures, this display may not be functional. The engaged driving direction is indicated by the LEDs on the selector lever. Releasing 1. Unclip the sleeve of the selector lever. 2. Pull the sleeve up over the selector lever until the sleeve is inside out. 3. Push the black cover forward using the screwdriver from the onboard tool kit, refer to page 127. Changing gears Via the selector lever > To shift up, pull back the selector lever. > To shift down, push it forward. 51 Online Edition for Part no. 01 41 0 014 960 - © 02/08 BMW AG Reference Mobility Driving tips 3 Release the transmission lock manually for towing only and forcefully apply the parking brake beforehand to prevent the vehicle from rolling. After parking the vehicle, lock the transmission lock again. Controls