2010 BMW 128 Owner's Manual - Page 213

4. Attach the connector, insert the bulb and turn it all the way in the opposite direction. 5. Attach the headlamp cover. Corner-illuminating lamps H3 bulb, 55 watts 1. Remove the top headlamp cover, using the screwdriver to push the detents to one side. Controls Reference Mobility 1 2 Inner brake lamp Outer brake lamp 211 Online Edition for Part no. 01 41 2 602 846 - © 08/09 BMW AG The figure shows the right-hand headlamp. 1. Turn the respective wheel inwards. 2. Using a coin, turn both locks of the cover all the way to the left, arrows 1, and remove the cover. 3. Turn the bulb holder to the left and remove it, arrow 2. 4. Apply gentle pressure to the bulb while turning it to the right for removal and replacement. 6. Attach the cover by positioning the bottom edge first and then turning both locks all the way to the right. Tail lamps > Turn signal: PY21W bulb, 21 watts > Backup lamp: W16W bulb, 16 watts 3. Slide the bulb out of the holder and pull off the connector. 4. Replace the bulb and attach the connector. 5. Insert the bulb holder and turn it all the way in the opposite direction. 6. Attach the headlamp cover. > Brake lamps: P21W bulb, 21 watts > Brake Force Display lamp: H21W bulb, 21 watts Turn signals, front PY21W bulb, 21 watts The turn signal bulb can be changed via a cover in the wheel arch. Communications Entertainment Navigation 2. Turn the bulb holder, see arrow, and remove it. 5. Insert the bulb holder and lock it by turning it to the right. Driving tips At a glance